3D Lithophane - Your empty filament spools are about to become drawers
Measure your spool, pick your drawers and print a storage tower that fits it exactly. Free with a free account.
Hi there,
If your workshop looks anything like mine, there is a pile of empty filament spools somewhere that is too good to throw away. Now they have a job. I have made a new free tool called Spool Drawers. Here is what it can do.
Made to your own spool. Type in four measurements: across the flanges, the hub, the hole in the middle and the width inside. Every drawer is made to fit that spool.
Two to six drawers. Pick how many drawers go on each spool and watch the 3D preview change as you go.
Swing or slide. Let the drawers swing out on a pin near the rim, like a classic drawer tower, or let them slide straight out with no holes to drill.
Pulls and labels. Every drawer gets a pull on the front, and you can add raised labels in any font on your computer, one line for each drawer.
A real fit. Set the walls, the floor and every gap, so the drawers suit your spool and your printer.
Pins and a drill guide. Swinging drawers come with pins, and a drill guide that sits in the spool's middle hole so every hole lands in the right place.
Build a tower. Stack your spools on a base, finish with a top cap that has a handle, and add a rod through the middle. The page even tells you how long to cut the rod.
Ready to print. Every part is laid out the way it prints, with no supports needed, and you download one zip with all the parts and a note on how it goes together.
Not sure where to start? Pick one of the ready designs, from a small half kilo spool to a full tower with a rod.
Checkout our [Youtube Video] (https://youtu.be/HxDvQ09Ig3k)
I would love to see your spool tower. Upload to the Gallery and earn extra Credits.
Happy printing,
Danie